ADW - Heat Shrinkable Tubing for Fiber Optic Splice Closure

Applications

It's a heavy wall heat shrinkable tubing with inner spiral polyamide hot melt adhesive coated. The outer heavy wall can provide reliable external protection, and high-performance hot melt adhesive can provide dependable waterproof performance and prevents leakage of the gas inside the closure.

Operating Temperature Range

Continuous operating temperature: -55℃ ~ 110℃
Minimum shrink temperature: 80℃
Full recovery temperature: Above 120˚C
Discoloration temperature of temperature sensitive paint: 230˚C

Color

Standard color: black, (Special sizes are available on request.)

Characteristics

Shrink ratio: 3:1
UV and water resistance
Corrosion resistance
Polyamide hot melt adhesive prevents leakage of the gas inside the closure
The special internal single-end non-adhesive glue applying method can exactly fix the cable on the position
Mechanical damage resistance
The outer temperature sensitive paint is convenient for the instruction of heat shrink operation

Technical Data

Property	Specification Requirement	Test Method	Typical Value
Tensile strength	≥10.3MPa	ASTM D2671	≥14 MPa
Elongation at break	≥200%	ASTM D2671	≥400％
Elongation at break after aging	≥100%	ASTM D2671 (150℃, 168hrs)	≥300％
Dielectric strength	≥19.7KV/mm	ASTM D2671	≥20kV/mm
Volume resistivity	≥10¹⁴Ω•cm	ASTM D2671	≥10¹⁴Ω•cm
Copper corrosion	No corrosion	ASTM D2671	No corrosion

Specification

Part Number	As supplied (mm)	After recovered (mm)		Standard Length (mm)
Part Number	I.D. (min) (D)	I.D. (max)	W.T. (min)	Standard Length (mm)
ADW033	33	8	3.2	200
ADW038	38	10.2	3.2	200
ADW040	40	12	4.1	200
ADW045	45	12	4.1	200
ADW075	75	22	4.1	200
ADW085	85	25	4.3	200
ADW105	105	30	4.3	200

ADW - Heat Shrinkable Tubing for Fiber Optic Splice Closure

FOSP - Heat Shrinkable Fiber Optic Splice Protector

FOSP-K - High-temperature Optical Fiber Protection Sleeve