ABS - Watertight Tube for Terminals and Crimp Splices

-55~+105 MinShrink80 Shrink3:1 Fire Uvproof Rainproof RU RoHS


The outer layer of ABS heat shrinkable tubing is made of high density polyethylene, and the inner layer is coated with polyamide hot melt adhesive. It is used for heat shrinkable terminals and heat shrinkable crimp splices. The tough outer layer of the product can resist the possible damage caused by the terminal clamping operation, and the inner hot melt adhesive with a temperature resistance of 105˚C meets the requirements of high temperature environments, such as the automotive engine room. This tubing provides excellent resistance to abrasion, water and corrosion for complete insulation and electrical connection protection.

Approvals / Specifications

UL224 File no. E323274

Operating Temperature Range

  • Continuous operating temperature: -55℃ ~ 105℃
  • Minimum shrink temperature: 80℃
  • Full recovery temperature: Above 130˚C


Standard color: red, blue and yellow, (Other colors, special sizes, and cut pieces are available on request.)


  • Shrink ratio: 3:1
  • Semi-rigid, abrasion resistant
  • Waterproof, moisture proof and UV resistant
  • Excellent electrical insulation properties
  • Compliance with RoHS and REACH environmental regulations

Technical Data

Property Specification Requirement Test Method Typical Value
Tensile strength ≥16MPa ASTM D2671 ≥19.5MPa
Elongation at break ≥200% ASTM D2671 ≥450%
Tensile strength after aging ≥11.5MPa ASTM D2671
(136˚C/168 hrs)
Elongation at break after aging ≥100% ASTM D2671
(136˚C/168 hrs)
Dielectric voltage withstand AC2500V/60S
No breakdown
ASTM D2671 No breakdown
Heat shock No cracking ASTM D2671
(250˚C/4 hrs)
No cracking
Volume resistivity ≥1014Ω‧cm ASTM D2671 ≥1014Ω‧cm
Copper corrosion No corrosion ASTM D2671
(136˚C/168 hrs)
No corrosion


Part Number As supplied
As recovery
Standard Length
I.D. W.T. I.D.
ABS48 4.8±0.3 0.50±0.15 1.6 1.10±0.15 100
ABS58 5.8±0.3 0.55±0.15 1.9 1.30±0.15 100
ABS68 6.8±0.3 0.60±0.15 2.4 1.35±0.15 100
ABS70 7.0±0.3 0.60±0.15 2.5 1.35±0.15 100
ABS80 8.0±0.3 0.70±0.15 3.0 1.45±0.15 50

Related Products