MENU
- Home
- Products
- Heat Shrink Tubing
- Adhesive-Lined Heat Shrink Tubing
- ABS - Watertight Tube For Terminals And Crimp Splices
ABS - Watertight Tube for Terminals and Crimp Splices
Applications
The outer layer of ABS heat shrinkable tubing is made of high density polyethylene, and the inner layer is coated with polyamide hot melt adhesive. It is used for heat shrinkable terminals and heat shrinkable crimp splices. The tough outer layer of the product can resist the possible damage caused by the terminal clamping operation, and the inner hot melt adhesive with a temperature resistance of 105˚C meets the requirements of high temperature environments, such as the automotive engine room. This tubing provides excellent resistance to abrasion, water and corrosion for complete insulation and electrical connection protection.
Approvals / Specifications
UL224 File no. E323274
Operating Temperature Range
- Continuous operating temperature: -55℃ ~ 105℃
- Minimum shrink temperature: 80℃
- Full recovery temperature: Above 130˚C
Color
Standard color: red, blue and yellow, (Other colors, special sizes, and cut pieces are available on request.)
Characteristics
- Shrink ratio: 3:1
- Semi-rigid, abrasion resistant
- Waterproof, moisture proof and UV resistant
- Excellent electrical insulation properties
- Compliance with RoHS and REACH environmental regulations
Technical Data
| Property | Specification Requirement | Test Method | Typical Value |
|---|---|---|---|
| Tensile strength | ≥16MPa | ASTM D2671 | ≥19.5MPa |
| Elongation at break | ≥200% | ASTM D2671 | ≥450% |
| Tensile strength after aging | ≥11.5MPa | ASTM D2671 (136˚C/168 hrs) |
≥15MPa |
| Elongation at break after aging | ≥100% | ASTM D2671 (136˚C/168 hrs) |
≥200% |
| Dielectric voltage withstand | AC2500V/60S No breakdown |
ASTM D2671 | No breakdown |
| Heat shock | No cracking | ASTM D2671 (250˚C/4 hrs) |
No cracking |
| Volume resistivity | ≥1014Ω‧cm | ASTM D2671 | ≥1014Ω‧cm |
| Copper corrosion | No corrosion | ASTM D2671 (136˚C/168 hrs) |
No corrosion |
Specification
| Part Number | As supplied (mm) |
As recovery (mm) |
Standard Length (Meter) |
||
|---|---|---|---|---|---|
| I.D. | W.T. | I.D. (max) |
W.T. | ||
| ABS48 | 4.8±0.3 | 0.50±0.15 | 1.6 | 1.10±0.15 | 100 |
| ABS58 | 5.8±0.3 | 0.55±0.15 | 1.9 | 1.30±0.15 | 100 |
| ABS68 | 6.8±0.3 | 0.60±0.15 | 2.4 | 1.35±0.15 | 100 |
| ABS70 | 7.0±0.3 | 0.60±0.15 | 2.5 | 1.35±0.15 | 100 |
| ABS80 | 8.0±0.3 | 0.70±0.15 | 3.0 | 1.45±0.15 | 50 |
Related Products
