Products

AEC - Heat Shrinkable Cable End Cap

AEC - Heat Shrinkable Cable End Cap

Applications:
Designed with a layer of spiral coated hot melt adhesive in the internal surface of the end cap, which provides highly resistant to moisture, fungus, and corrosion, and recommended for use both in open air and on underground power distribution cables with PVC, lead or XLPE sheaths.
Operating temperature range:
  • Operating temperature: -55˚C~110˚C
  • Minimum shrink temperature: 80˚C
  • Minimum fully recovery temperature: 120˚C
Color:

black

Color:black
End cap with valve is available on request.
Inquiry
  • Characteristics
  • Specification
  • Technical Data
  • Shrinkable Ratio: 2:1
  • Electrical insulation to 1000V
  • Easy installation over the cable end
  • Abrasion resistance and mechanical protection
  • EVA hot melt adhesive or Polyamide hot-melt adhesive for pressuried cable can be employed for inner spiral coated adhesive
Part No.As supplied
(mm)
After recovered (mm)Cable diameter (mm)
H(min)H(max)A(±10%)L(±10%)W(±5%)
Standard length
AEC012 12 4.0 15 40 2.6 4-10
AEC014 14 5.0 18 45 2.2 5-12
AEC020 20 6.0 25 55 2.8 6-16
AEC025 25 8.5 30 68 2.8 10-20
AEC035 35 16.0 35 83 3.3 17-30
AEC040 40 15.0 40 83 3.3 18-32
AEC055 55 26.0 50 103 3.5 28-48
AEC075 75 36.0 55 120 4.0 45-68
AEC100 100 52.0 70 140 4.0 55-90
AEC120 120 60.0 70 150 4.0 65-110
AEC145 145 60.0 70 150 4.0 70-130
AEC160 160 82.0 70 150 4.0 90-150
AEC200 200 90.0 70 160 4.2 100-180
Extended length
AEC014L 14 5.0 30 55 2.2 5-12
AEC042L 42 15.0 40 110 3.3 18-34
AEC055L 55 23.0 70 140 3.8 25-48
AEC062L 62 23.0 70 140 3.8 25-55
AEC075L 75 32.0 70 150 4.0 40-68
AEC105L 105 45.0 65 150 4.0 50-90

 

PropertyTest MethodTypical Value
Operating temperature IEC 216 -55°C to +110°C
Tensile strength ASTM D 638 >14 MPa
Elongation at break ASTM D 638 > 400%
Density ASTM D 792 1.05
Elongation at break after aging 150°C, 168hrs >300%
Dielectric strength IEC 243 >15KV/mm
Volume resistance IEC 93 >1014Ω.cm