Products

200˚C FEP Heat Shrinkable Tubing

200˚C FEP Heat Shrinkable Tubing

Applications:
The FEP heat shrinkable tubing made of fluorinated ethylene propylene has excellent abrasion, chemical and high temperature resistance. Low coefficient of friction and non-stick characteristics of the material makes it very suitable for the covering of drive rollers. FEP’s material strength and UV resistance are often applied to the covering of fluorescent tubes and UV tubes.
Approvals / Specifications
SAE AMS-DTL-23053/11
Operating Termperature Range:
  • Operating temperature: -65˚C~200˚C
  • Minimum shrink temperature: 60˚C
  • Full recovery temperature: Above 120˚C
  • Temperatures for product preservation: Below 50˚C
Color:

C

Standard color: clear (Special sizes and cut pieces are available on request.)
Inquiry
  • Characteristics
  • Specification
  • Technical Data
  • Shrink ratio: 1.25:1 
  • Excellent flame retardance
  • Superior chemical and abrasion resistance
  • Ideal insulation property
  • High transparency
  • Coefficient of friction: 0.2~0.3


Part NumberAs supplied (mm)After recovered (mm)Standard Length (Meter)
I.D.(min)W.T.(Nominal Size)I.D.(max)W.T.(Nominal Size)
Thick Type
FEP0047 4.7±1 0.20 3.8 0.25 1
FEP0055 5.5±1 0.20 4.5 0.25 1
FEP0070 7±1.5 0.20 5.6 0.25 1
FEP0090 9±1.5 0.20 7.5 0.26 1
FEP0115 11.5±1.5 0.25 9.3 0.30 1
FEP0145 14.5±1.5 0.3 11.7 0.37 1
FEP0190 19±2 0.3 15.3 0.37 1
FEP0240 24±2 0.4 19.3 0.5 1
FEP0280 28±2 0.4 22.5 0.5 1
FEP0350 35±2 0.4 28.1 0.5 1
FEP0440 44±2.5 0.4 36.1 0.5 1
FEP0540 54±2.5 0.4 43.3 0.5 1
FEP0660 66±3 0.4 52.9 0.5 1
FEP0780 78±3 0.4 62.5 0.5 1
FEP0900 90±4 0.4 72.1 0.5 1
FEP1030 103±4 0.4 82.5 0.5 1
Thin Type
FEPTW0070 7±1.5 0.15 5.6 0.20 1
FEPTW0090 9±1.5 0.15 7.5 0.20 1
FEPTW0115 11.5±1.5 0.2 9.3 0.26 1
FEPTW0145 14.5±1.5 0.2 11.7 0.26 1
FEPTW0165 16.5±1.5 0.2 13.2 0.26 1
FEPTW0190 19±2 0.2 15.3 0.26 1
FEPTW0240 24±2 0.2 19.3 0.26 1
FEPTW0280 28±2 0.2 22.5 0.26 1
FEPTW0350 35±2 0.2 28.1 0.26 1
FEPTW0440 44±2.5 0.2 36.1 0.3 1
FEPTW0540 54±2.5 0.2 43.3 0.3 1
FEPTW0660 66±3 0.3 52.9 0.4 1
FEPTW0780 78±3 0.3 62.5 0.4 1
PropertySpecification RequirementTest MethodTypical Value
Longitudinal change -5%~5% ASTM D2671 Pass
Tensile strength ≥13.8MPa ASTM D638 ≥20MPa
Elongation at break ≥150% ASTM D638 ≥250%
Dielectric voltage withstand AC2500V/60S
No breakdown
ASTM D2671 No breakdown
Volume resistivity ≥1015Ω‧cm ASTM D876 ≥1016Ω‧cm
Copper corrosion  No corrosion ASTM D2671
(158˚C/168 hrs)
 No corrosion
Flammability VW-1 UL 224 Pass