Products

ADW - Heat shrinkable tubing for fiber optic splice closure

ADW - Heat shrinkable tubing for fiber optic splice closure

Applications:
It’s a heavy wall heat shrinkable tubing with inner spiral polyamide hot melt adhesive coated. The outer heavy wall can provide reliable external protection, and high performance hot melt adhesive can provide reliable waterproof performance and prevents gas leakage inside the closure.
Operating temperature range:
  • Operating temperature: -55˚C~110˚C
  • Minimum shrink temperature: 80˚C
  • Full recovery temperature: Above 120˚C
  • Discoloration temperature of temperature sensitive paint: 230˚C
Color:

black

Standard color: black (Special sizes are available on request.)
Inquiry
  • Characteristics
  • Specification
  • Technical Data
      • UV and water resistance
      • Corrosion resistance
      • Polyamide hot melt adhesive prevents gas leakage inside the closure
      • The special gluing method which the internal single-end is without adhesive can exactly fix the cable on the position
      • Mechanical damage resistance
      • The outer temperature sensitive paint is convenient for the instruction of heat shrink operation

Branch off clip

Hot melt glue blocks

Part Number

As supplied(mm)After recovered
(mm)

Standard Length
(Meter)

I.D.(min)(D)I.D.(max)W.T(min)
ADW033 33 8 3.2 200
ADW038 38 10.2 3.2 200
ADW040 40 12 4.1 200
ADW045 45 12 4.1 200
ADW075 75 22 4.1 200
ADW085 85 25 4.3 200
ADW105 105 30 4.3 200
PropertySpecification RequirementTest MethodTypical Value
Tensile strength ≥10.3MPa ASTM D638 ≥14 MPa
Elongation at break ≥200% ASTM D638 ≥400%
Elongation at break after aging ≥100% ASTM D 638 (150℃, 168hrs) ≥300%
Dielectric strength ≥19.7KV/mm ASTM D2671 ≥20KV/mm
Volume resistivity ≥1014Ω.cm ASTM D876 ≥1014Ω.cm
Copper corrosion No corrosion ASTM D2671 No corrosion