GAST-E - Closed End connector splices

GAST-E - Closed End connector splices

GAST-E closed end connector splices are designed for the wire terminal protection of multiple-wire combinations, replacing the traditional crimping closed end method. The product is composed of a PVDF high abrasion resistance heat shrinkable tubing, a solder sleeve for soldering, a spiral copper coil for winding wires, high performance hot melt adhesive for water resistance, and the easy identification colored glass bead for encapsulation. It makes the assembly of wire terminals become very easy and reliable.
Operating Termperature Range:
  • Operating temperature: -40˚C~125˚C
  • Minimum shrink temperature: 150˚C
  • Full recovery temperature: Above 175˚C
  • Starting temperature of solder melting: 138˚C
  • Full melting temperature of solder: 160˚C





Standard colors: green, red, blue, and yellow

  • Characteristics
  • Specification
  • Technical Data
  • Abrasion resistance property of PVDF outer layer
  • Excellent chemical resistance
  • Excellent insulation performance
  • Flame retardant
Part NumberColor CodeProduct Dimensions(mm)Wire Range
GAST-E01 Green 38.3 3.6 +0.4/-0.2 26.0±2.0 0.7 2.4
GAST-E02 Red 37.7 5.0 +0.7/-0.2 23.5±2.0 2.0 4.0
GAST-E03 Blue 45.5 7.5 +0.9/-0.2 26.5±2.0 3.5 8.0
GAST-E04 Yellow 45.0 9.4 +0.9/-0.3 25.5±3.0 7.5 12.0

PropertyTest MethodTypical Value
Waterproof level IP67 Pass
Volume resistivity ASTM D876 ≥1013Ω.cm
Dielectric strength ASTM D2671 2.0 kV/mm