Products

125˚C CTMS - Heat Shrinkable Identification Sleeves

125˚C CTMS - Heat Shrinkable Identification Sleeves

Applications:
CTMS is made of high-performance polyolefin and is used in industrial, military and aerospace applications. Markers are permanent after printing and do not require an outer protective film.
Approvals / Specifications:
UL224 File no. E255532, 125˚C VW-1
SAE-AS81531, MIL-STD-202
Operating Termperature Range:
  • Operating temperature: -55˚C~125˚C
  • Minimum shrink temperature: 70˚C
  • Full recovery temperature: Above 110˚C
Color:

yellow

white

Standard color:White,yellow
Inquiry
  • Characteristics
  • Specification
  • Technical Data
  • Video
  • Shrink ratio: 3:1
  • Flexible, flame retardant
  • Abrasion and chemical resistance
  • Reliable physical, chemical and electrical performance
  • Flat tubes offer ease of printing
Part NumberNominal SizeAs supplied (mm)After recovered (mm)Standard Length (Meter)
mminchI.D.(min)I.D.(max)
CTMS1253X0024 2.4 3/32 2.4 0.8 100
CTMS1253X0032 3.2 1/8 3.2 1.1 100
CTMS1253X0048 4.8 3/16 4.8 1.6 100
CTMS1253X0064 6.4 1/4 6.4 2.1 100
CTMS1253X0095 9.5 3/8 9.5 3.2 100
CTMS1253X0127 12.7 1/2 12.7 4.2 100
CTMS1253X0191 19.1 3/4 19.1 6.3 100
CTMS1253X0254 25.4 1 25.4 8.5 100
PropertySpecification RequirementTest MethodTypical Value
Longitudinal change ≤10% ASTM D2671 ≤5%
Tensile strength ≥10.3MPa ASTM D638 ≥10.3MPa
Elongation at break ≥200% ASTM D638 ≥300%
Elongation at break after aging ≥100% ASTM D638 (158˚C/168 hrs) ≥200%
Heat shock No cracking ASTM D2671 No cracking
Low temperature flexibility No cracking ASTM D2671 (-55˚C/4 hrs) No cracking
Dielectric voltage withstand AC2500V/60S No breakdown ASTM D2671 No breakdown
Dielectric strength ≥19.7kV/mm ASTM D2671 ≥20kV/mm
Volume resistivity ≥1014Ω‧cm ASTM D876 ≥1014Ω‧cm
Copper corrosion No corrosion ASTM D2671 No corrosion
Print performance Print legible after 50 rubs Print legible after 30 strokes SAE AS81531 MIL-STD-202 Pass
Fluid resistance Print legible SAE AS81531 (23˚C/24 hrs) Pass
Flammability Self extinguishing within 1 minute after fire source removed UL224 Pass

Click To Watch