Products

ASM - General Purpose, Heavy Wall Polyolefin Tubing

ASM - General Purpose, Heavy Wall Polyolefin Tubing

Applications:

It is made of polyolefin and hot melt adhesive. Compared with ATM products, ASM has a thicker wall thickness for better outer protection. With excellent abrasion and corrosion resistance, it is suitable for the insulation protection of cables and terminals and is widely used in communications, power cables and chemical pipelines.

Operating Termperature Range:
  • Operating temperature: -55˚C~110˚C
  • Minimum shrink temperature: 80˚C
  • Full recovery temperature: Above 120˚C
Color:

black

Standard color :Black
Inquiry
  • Characteristics
  • Specification
  • Technical Data
  • Shrink ratio: 3:1
  • Semi-rigid, abrasion resistant
  • Waterproof, moisture and UV resistant
  • Can meet very strict requirements of mechanical performance
  • Excellent electrical insulation properties
  • Compliance with RoHS and REACH environmental regulations
Part NumberAs supplied (mm)After recovered (mm)Standard Length (Meter)
I.D.(min)I.D.(max)W.T(min)
ASM  Heavy wall polyolefin tubing with hot melt adhesive
ASM009 9 3 1.8 1.22
ASM013 13 4 2.5 1.22
ASM022 22 6 2.7 1.22
ASM033 33 8 3.2 1.22
ASM040 40 12 4.1 1.22
ASM045 45 12 4.1 1.22
ASM055 55 16 4.1 1.22
ASM075 75 22 4.1 1.22
ASM085 85 25 4.3 1.22
ASM095 95 30 4.3 1.22
ASM115 115 34 4.3 1.22
ASM130 130 36 4.3 1.22
ASM160 160 50 4.3 1.22
ASM180 180 50 4.3 1.22
ASM200 200 60 4.3 1.22
ASM235 235 65 4.5 1.22
ASM265 265 75 4.5 1.22
ASM300 300 85 4.5 1.22
GSM  Heavy wall polyolefin tubing without hot melt adhesive
GSM009 9 3 1.8 1.22
GSM013 13 4 2.5 1.22
GSM022 22 6 2.7 1.22
GSM033 33 8 3.2 1.22
GSM040 40 12 4.1 1.22
GSM045 45 12 4.1 1.22
GSM055 55 16 4.1 1.22
GSM075 75 22 4.1 1.22
GSM085 85 25 4.3 1.22
GSM095 95 30 4.3 1.22
GSM115 115 34 4.3 1.22
GSM130 130 36 4.3 1.22
GSM160 160 50 4.3 1.22
GSM180 180 50 4.3 1.22
GSM200 200 60 4.3 1.22
GSM235 235 65 4.5 1.22
GSM265 265 75 4.5 1.22
GSM300 300 85 4.5 1.22
PropertyTest MethodTypical Value
Tensile strength ASTM D638 ≥12MPa
Elongation at break ASTM D638 ≥350%
Elongation at break after aging ASTM D638
(150˚C/168 hrs)
≥300%
Dielectric strength ASTM D2671 ≥20kV/mm
Volume resistivity ASTM D876 ≥1012Ω‧cm
Copper stability ASTM D2671 Pass
Hot melt adhesive
Water absorption ISO 62 ≤0.2%
Peel strength (PE) DIN 30672 ≥4N/cm